Dc-dc High Voltage Charging Zvs Booster Module 45-390v 780v Adjustable Dual Outp

Descriptions:
High voltage boost module, plus or minus 45-390V 780V wide voltage range, input double current limit protection, output voltage regulation function, suitable for capacitor charging, hunting, rodent control, glow tube power
Positive and negative 45-390V dual output. The maximum output voltage of 780V.Optional voltmeter: 5-30V power supply (the best recommended power supply 5-15V), range 0-999V. Optional parts, the module itself does not take, photographed only. (The meter can only measure the positive pressure
For example, 220V, and the actual voltage is 440V
Applications:
1, capacitor charging, electromagnetic gun power
2, for your electronic equipment, power supply, you can set the output voltage with your system voltage
3, pressure test power, glow tube power
4, hunting, rodent control

Note:
Pay attention
The module output is high-pressure, people, animals will be life-threatening, please use with security precautions

Specifications:
Module Name: High Voltage Boost Module
Input voltage: 10-32V input (for wide input voltage range applications)
Input Current: 5A (MAX)
Static operating current: 15mA (12V or 50V, the higher the output voltage is too static current will increase)
Output voltage: 1,45-390V continuously adjustable
Output current: 0.2A MAX (with the input and output voltage-related, the higher the output voltage, the smaller the output current)
Output power: 40W (peak 70W)
Operating temperature: -40 ~ +85 (ambient temperature is too high, please strengthen the heat)
Operating frequency: 75KHz
Conversion efficiency: up to 88% (efficiency and input and output voltage, current, pressure-related)
Short-circuit protection: Yes. (Input 10A fuse, please do not directly connect short-circuit arc line
Direct connect may damage the rectifier device. If you need to short-circuit the arc line, please put resistor in series to control the current)
Over-current protection: Yes. (Input current exceeds 4.5A, lower output voltage)
Overvoltage protection: Yes. (Output voltage exceeds 410V, lower output voltage)
Input reverse protection: Yes (not self-recovery type, inversely connection will burn the fuse)
Installation: 4x 3mm screws
Wiring: free solder terminal output (with shell for the welding output)
To the capacitor charging time measured data:
470uF to 390V for 2 seconds
1000uF to 390V for 4 seconds
2200uF is fully charged to 390V for 8 seconds
4700uF is fully charged to 390V for 18 seconds
Size: 6×4.6x2cm/2.36×1.81×0.79inch
Quantity: 1 Pc

Note:
Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you
Package Contents:
1 Pc x Booster Module